|
 |
 HOME - Product - Double Twisting Bunching Machine |
|
 |
|
|
 |
|
| Double Twisting Bunching Machine |
 High speed and high productivity |
| Low investment and low running cost |
| No need foundation working |
| High efficiency operation |
| Low noise and low vibration |
|
|
 FS-ST15
|
Skill position |
Skill parameter |
| Product type |
3+9+15 1 step Out-In type doubel twist buncher
(3+9 stranding machine combined) |
| Cord construction |
3+9+15, 3/8, 1+18 |
| Power supply |
AC3 phase 50Hz 380v |
| Filament diameter |
Min. 0.175mm ~ Max. 0.40mm |
| Machine RPM |
Max. 3,500 RPM(7,000 twist) |
| Lay direction |
S / Z |
| Main motor |
AC 4P 22Kw 380V |
| Lay pitch |
6.22mm ~ 20.56mm (change gear) |
| Machine direction |
Right hand type
- Wire pass from left to right direction |
| RPM control |
Controlled by AC invert system |
| Pay-Off |
External ; BF-120 Bobbin, 18POS'/unit(for 3+9+15)
Internal ; BB-120 Bobbin, 1 POS'/unit(for 3+9,verical type) |
| Bobbin brake |
External ; BF-120 x 15 Bobbin (Magenetic flier)
Internal ; BB-120 x 1 Bobbin (Multi Band Lining-chain) |
| Pre over twist |
Main gear change control system
Speed Ratio ; 1.75 ~ 1.95 N |
| Post over twist |
Main gear change control system
Speed Ration ; 1.50 ~ 1.03 N |
| Capstan |
Double capstan |
| Straightener |
20 + 21 1set Pitch 21mm |
| Take-up |
BB-120 (combination ; B40, B80, BB80, BB120)
Brake ; Magnetic hysteresis
Traverse ; Screw type |
|
|
| FS-ST9 |
Skill position |
Skill parameter |
| Product type |
3+9 1 step Out-In type double twist buncher
(1x3 stranding machine combined) |
| Cord construction |
3+9, 3/9 |
| Power supply |
AC3 phase 50Hz 380v |
| Filament diameter |
Min. 0.175mm ~ Max. 0.40mm |
| Machine RPM |
Max. 3,500 RPM(7,000 twist) |
| Lay direction |
S / Z |
| Main motor |
AC 4P 15Kw 380V |
| Lay pitch |
6.22mm ~ 20.56mm (change gear) |
| Machine direction |
Right hand type
- Wire pass from left to right direction |
| RPM control |
Controlled by AC invert system |
| Pay-Off |
External ; BF-120 Bobbin., 9POS'/unit(for 3+9)
Internal ; BB-80 Bobbin, 2 POS'/unit(for 1x3,verical type)
External ; BB-80 Bobbin(BB-120 Bobbin), 1 POS'/unit(for 1x3,verical type) |
| Bobbin brake |
External ; BF-120 x 9 Bobbin (Magenetic flier)
Internal ; BB-80 x 2 Bobbin (Multi Band Lining-chain)
External ; BB-80(BB-120) x 1 Bobbin (Multi Band Lining-chain) |
| Pre over twist |
Main gear change control system
Speed Ratio ; 1.75 ~ 1.95 N |
| Post over twist |
Main gear change control system
Speed Ration ; 1.50 ~ 1.03 N |
| Capstan |
Double capstan |
| Straightener |
6 + 7 2set Pitch 21mm |
| Take-up |
BB-120 (combination ; B40, B80, BB80, BB120)
Brake ; Magnetic hysteresis
Traverse ; Screw type |
|
|
|
 |
|
| Double Twisting Bunching Machine |
| High speed and high productivity |
| Low investment and low running cost |
| No need foundation working |
| High efficiency operation |
| Low noise and low vibration |
|
| FS-ST3 |
| Skill position |
Skill parameter |
| Product type |
iIn-Out type double twist buncher |
| Cord construction |
1x2, 2+1, 2+2 |
| Power supply |
AC3 phase 50Hz 380v |
| Machine RPM |
Max. 3,500 RPM(7,000 twist) |
| Lay direction |
S / Z |
| Main motor |
AC 4P 7.5Kw 380V |
| Lay pitch |
14mm, 16mm |
| Machine direction |
Right hand type
- Wire pass from left to right direction |
| RPM control |
Controlled by AC invert system |
| Pay-Off |
External ; BB-120 Bobbin, 2POS'/unit
Internal ; BB-80 Bobbin, 2 POS'/unit |
| Bobbin brake |
External ; BB-120 x 2 Bobbin (Multil Band Lining-chain)
Internal ; BB-80 x 2 Bobbin (Multi Band Lining-chain) |
| Over Twister |
Extra motor control (AC 2P 0.75Kw 380V) |
| Max. RPM 6,600 (push button control) |
| Capstan |
Double capstan
The wire break detector located between two capstan pulleys.
A meter counter disk and proximity switch ar mounted behind that capstan group. |
| Straightener |
20 + 21 2set Pitch 22mm / 14 + 15 1set Pitch 19mm |
| Take-up |
B40, B80
Brake ; By motor dissipation and brake
Traverse ; Ball screw type |
|
|
|
|
|
|
|
)
)
